LS Type Shaft Screw Conveyor U Shaped Screw Conveyor DN200mm-400mm
Product Description
LS U Type Screw Conveyor adopts the structure of "u"-shaped machine groove, lower screw assembly and fixed installation. The u-shaped groove is connected by segmented flanges, which is easy to replace and maintain the inner bushing. The LS U Type Screw Conveyor is suitable for horizontal or small inclination conveying, and the inclination angle does not exceed 30°. It can be fed or discharged at a single point, and can also be fed or discharged at multiple points. It is suitable for occasions with large dust and environmental requirements. The upper part of the conveyor is equipped with a rain-proof cover, which has good sealing performance. The conveying process is basically closed transportation, which can effectively reduce the leakage of indoor odor or the entry of external dust.
Technical Parameters
Note:
n---Rotation Speed (r/min), Allowable Deviation < 10%
Q---Capacity (m3/h), Filling Factor = 0.33
| Model | 200 | 250 | 315 | 400 | 500 |
| Diameter/mm | 200 | 250 | 315 | 400 | 500 |
| Screw pitch/mm | 200 | 250 | 315 | 355 | 400 |
| n | 100 | 90 | 80 | 71 | 63 |
| Q | 13 | 22 | 31 | 62 | 98 |
| n | 80 | 71 | 63 | 56 | 50 |
| Q | 10 | 18 | 24 | 49 | 78 |
| n | 63 | 56 | 50 | 45 | 40 |
| Q | 8 | 14 | 19 | 39 | 62 |
| n | 50 | 45 | 40 | 36 | 32 |
| Q | 6.2 | 11 | 15.4 | 31 | 50 |
Product Feature
01 With cover, whole sealing structure, without pollution to the environment.
02 Conveyor length can be customized according to your need.
03 Simple structure, use little material to manufacture, save cost for you.
04 Conveyor angle can be 0-30 degree. Save space on the site.
05 Screw pitch can be customized according to require of different material.
06 According to real working conditions, trough screw conveyor machine can be multiple inlets and outlets.
07 Adopts hanging bearing to connect screw blades which is longer than 3-4m.
08 Adopts the method of spot welding to weld spiral blade on the screw shaft.
09 Reducer motor brand can be domestic or imported: Tailong, SEW, Siemens etc.
10 Easy to disassemble into several sections, save space during transportation.
Product Structure
The U Type Shaft Screw Conveyor is mainly composed of the driving device, the head assembly, the casing, the screw body, the tank lining, the feeding port, the discharging port, the cover (if necessary), the base and so on.
Our products are sold all over the world, you can rest assured.
